If you are someone who sews for a living, there's a good chance that you want to make shower curtains, patio covers, or other items that need reinforced holes in them. This is important to consider because it will allow you to create a wider variety of items that you can sell. Luckily, you can reinforce the holes easier by using metal grommets. Here are some tips for using them in a sewing project so that the process is as smooth as possible.
1. Purchase the Full Grommet Kit First
When you first start using grommets, pay the extra money for a starter kit, rather than just buying the grommets on their own. You want to do this because it will allow you to obtain all of the tools that you need for grommet installation with one purchase, rather than you having to try to track down each individual tool. Inside the kit, you might receive a set of grommet pliers or a small anvil and hammer that are specifically designed to hammer grommets into position. Once you have these tools, you can simply purchase individual grommets. Know that the pliers will be more effective for smaller grommets, which are also called eyelets, while the hammer and anvil will be most useful on larger grommets.
2. Purchase Interfacing
In order to truly reinforce the hole that you want to create in your sewing project, you are going to need a more durable fabric beneath it. This is called an interface. This interface can be purchased from craft stores and is often canvas.
3. Use the Male Portion for Spacing
There are two pieces of each grommet and one goes into the other. The one that is not just a circle is the male portion of the grommet. You should use this when you are planning out your spacing. Take your cloth and secure it so that it is lying flat and taut. Then, pull out a ruler and lay it across the side where you are going to want to install the grommets. Finally, take the male portion and lay out each grommet beforehand so that they are evenly spaced and centered. Use a seam gauge for additional accuracy. You want to use the metal portion because it will give you a more accurate reading.
4. Trace Where the Grommets are Placed
Finally, use a pencil to trace where the grommets are going to go on your fabric. Trace the inside circle of the male portion. This will allow you to clear off the grommets from your cloth and reposition them exactly where you measured.
For more information, talk to a company that specializes in metal and rubber grommets. To learn more, visit a website like http://accurate-prod.com.
Share